Blade L= 3.5 inches.
Overall L= Approx 9 inches.

We have been working on manufacturing two, Double Bladed Folder Designs for some time now. These double bladed designs are extremely difficult to manufacture and we have put this project on hold until we redesign the back springs. But what we have done is taken some of the springs and liners from this project and used them to manufacture two excellent custom folder designs. We really like the size and blade designs for both of these Limited Edition Custom Pocket Knives. Only 40 of each style will ever be produced! 

D2 Steel Drop Clip Blade L = 3.25” / Overall Open  = 7.75” / Closed 4.5” / Shed American Moose antler scales.  

Drop Clip Folder LE  

Blade L= 4”
Overall L= Approx. 7.5 inch / Full Tang Construction
Twist Pattern – Skinning Blade Design with Gut Hook and Elk Antler Scales

Blade L= 6”  / 240 Layers / Twist Pattern / Drop Clip Design / Elk Antler Scales  
Overall L= Approx. 10 .5 inch / Full Tang Construction  
The Ultimate Camp Knife! Extremely Functional and Impressive. Our proudest Piece.

Small Notch Folder (FSN3.25)
D2 Blade L = 3.25” / Weight = 4 oz.
Open = 7.75” / Closed = 4.

Md. Notch Folder (FMN3.5)
D2 Blade L = 3.5” / Weight = 5 oz
Open = 8.3” / Closed = 4.5”
(Crown / Burr antler handle)

We have been working on manufacturing two, Double Bladed Folder Designs for some time now. These double bladed designs are extremely difficult to manufacture and we have put this project on hold until we redesign the back springs. But what we have done is taken some of the springs and liners from this project and used them to manufacture two excellent custom folder designs. We really like the size and blade designs for both of these Limited Edition Custom Pocket Knives. Only 50 of each style will ever be produced!

D2 Steel Trapper Blade L = 3.25” / Overall Open  = 7.75” / Closed 4.5” / Shed American Moose antler scales.  

Our mistake is your special! We accidently profiled our Tool Steel 8” Bowie Design, which is normally manufactured with 1095 High Carbon Tool Steel, with D2 steel. One of my guys accidently grabbed a sheet of D2 steel, instead of 1095 when cutting out the profile for this popular design. This is a $200 knife offered at for $98! Only 60 units will ever be manufactured. Shed Elk or Deer antler crown/burr handle and high quality leather sheath included. Call us if you would like to have it laser engraved or personalized. Blade L = 7.5” / Overall L = Approx. 14”

Large Notch Folder (FLN4.0)
D2 Blade L = 4” / Weight = 6.5 oz
Open = 9.5” / Closed = 5”

We designed this full tang skinning knife last fall and to be quite honest with you, we are not sure why it has not had stronger demand.
It’s an awesome knife! The design allows you to get your fingers under the handle while the blade remains lower than your grip.

It’s a very unique, functional design…perfect for the kitchen too. We dressed it up by adding non slip finger grooves to the bottom of the handle.

Blade L = 3.25” / Overall  = 8.25”  / Includes a Leather Pouch sheath and can be laser engraved with a name or initials at no charge.

Small Back Lock (FSBL2.5) 
D2 Blade L = 2.5” / 2.5 oz
Open = 5.75” / Closed 2.8”

Large Back Lock Folder / Alaskan Caribou Antler (FLBL4.0)
D2 Steel Blade L = 3.75” / Weight = 3 oz.
Open = 7.75” / Closed = 4.0

This is a fantastic all-purpose hunting Knife! The 4” blade has been crafted from 1095 High Carbon Tool Steel. Just like all Silver Stag Knives, the blade has been ground, polished and sharpened “free-hand”. Jeweling has been applied to the blade. Jeweling helps the blade surface retain corrosion resistant oil, and it also gives the knife a traditional, classic look. The handle has been hand shaped from shed Elk antler.

Blade L= 4.0 inches.
Overall L= Approx 7 inches.

Blade L= 2 3/4 inches.
Overall L= Approx 6 inches.

Blade L = 2.75 inches.
Overall = 7 inches.